Find more possible applications in our Photogallery
Module Platform Base Plate
Pentagram shaped base plate with star shaped molding
Dimensions: 131 x 124 x 13 cm 51 5/8 x 48 7/8 x 5 1/8 inchesDue to the 5 lockable wheels the whole system is easy to move. On the top 5 sturdy eyehooks. The different support pipes are easily mounted in either the center or the perimeter positions. On these vertical pipes the module system accessories are quick to install and remove. The base plate itself already offers a large variety of possibilities for restraints.
Naturally the pads are protected against sliding and you have the choice between genuine leather or easy – care pleather material. The pads can also be ordered seperatly at a later time.
Beam
Material: solid beech wood, black finish
Dimensions: 130 x 12 x 16 cm
51 2/8 x 4 ¾ x 6 3/8 inches
The beam is easily installed on its support pipes. The 4 pulleys are located on the inside for precise guidance of the cable. The cable can be either used on the outsides or as a central rope.
On the front and back of the „Beam“3 fixed eyehooks can be installed.
Maximum capacity: (120kg), 265 pounds
Support Pipes High
Material: High grade steel, polished surface
Most of the module system accessories are mounted onto these support pipes. They can be used in combination with any base plate and installed in the center or perimeter position.
Standard length: (240cm), 94 ½ inches
Important comment: all pipes used have to leave a (14cm), 5 ½ inches clearance from the ceiling, otherwise the module system can not be installed.
Choice of pipe length: (230cm), 90 ½ - (260cm), 102 ¼ inches ((3cm), 1 ¼ inches apart in length, see menu)
Cable Winch
Material: solid beech wood, black finish, with a sturdy metal construction
The „Cable Winch“is easily mounted onto one of the support pipes. It is equipped with 2 steel cables, one of which can be removed with a cotter pin (no additional tools are needed). The remaining cable can now be guided through the center pulley of the „Beam“.
The „Cable Winch“with one cable can also be utilized in combination with the module system accessory „Top“.
Maximum capacity: (120Kg), 265 pounds
Vario Board
Solid support beam with cushioned plates
Material: Black genuine leather or easy – care pleather material
Dimensions: 128 x 15 x 11 cm(L/W/H)
50 3/8 x 5 7/8 x 4 ¼ inches (L/W/H)
The Vario Board can be mounted onto 2 horizontal pipes in any position with its quick release grips. No additional tools are needed. On the underside there are slits for strap insertion. The sides house 7 high grade steel fixed eyehooks and the end caps house 1 each. By pulling a rope through the eyehook on one end cap you can use the module system accessory „Cable Winch“to easily tilt the board.
Thigh Support
Material: Genuine leather or easy – care pleather material
Genuine leather strap
The precurved „Thigh Supports“have soft cushioning and are equipped with a sturdy leather strap. This package includes the necessary pipe adapters, which allows you to vary the distance to the bench and the height of the „Thigh Supports“. Its angle is interchangeable in one fluid motion.
Package:
1 Modul Platform Base Plate ( Pads optional)
2 Pipes High
1 Beam
1 Cable Wrench
4 horizontal Pipes ( 2 Vertical, 2 horizontal )
2 sets of pipe adapters "Pipe to Pipe"
1 Vario Board
2 Thigh Supports
For easier installment of the hotizontal pipes (mounting for the Varioboard) we recommend :
