Find more possible applications in our Photogallery
Module Platform Base Plate
Pentagram shaped base plate with star shaped molding
Dimensions: 131 x 124 x 13 cm
51 5/8 x 48 7/8 x 5 1/8 inches
Due to the 5 lockable wheels the whole system is easy to move. On the top 5 sturdy eyehooks. The different support pipes are easily mounted in either the center or the perimeter positions. On these vertical pipes the module system accessories are quick to install and remove. The base plate itself already offers a large variety of possibilities for restraints.
This system offers removable pads for restraining on its base. The padded surfaces consist of 4 individual sections, which are fitted for the base plate when put down. Naturally the pads are protected against sliding and you have the choice between genuine leather or easy – care pleather material. The pads can also be ordered seperatly at a later time.
Beam
Material: solid beech wood, black finish
Dimensions: 130 x 12 x 16 cm
51 2/8 x 4 ¾ x 6 3/8 inches
The beam is easily installed on its support pipes. The 4 pulleys are located on the inside for precise guidance of the cable. The cable can be either used on the outsides or as a central rope.
On the front and back of the „Beam“3 fixed eyehooks can be installed.
Maximum capacity: (120kg), 265 pounds
Support Pipes High
Material: Stainless steel, polished surface
Most of the module system accessories are mounted onto these support pipes. They can be used in combination with any base plate and installed in the center or perimeter position.
Standard length: (240cm), 94 ½ inches
Important comment: all pipes used have to leave a (14cm), 5 ½ inches clearance from the ceiling, otherwise the module system can not be installed.
Cable Winch
Material: solid beech wood, black finish, with a sturdy metal construction
The „Cable Winch“is easily mounted onto one of the support pipes. It is equipped with 2 steel cables, one of which can be removed with a cotter pin (no additional tools are needed). The remaining cable can now be guided through the center pulley of the „Beam“.
The „Cable Winch“with one cable can also be utilized in combination with the module system accessory „Top“.
Maximum capacity: (120Kg), 265 pounds
Wide Diagonal Bench
Comfortably cushioned bench
Material: Black genuine Leather or easy – care pleather material
Dimensions: 80 x 60 x 7cm
31 ½ x 23 5/8 x 2 ¾ inches
The bench is easy to move on its surface and no tools are needed to stabilize it with 2 quick release grips. On each corner a D_ ring is installed.
Head Rest
Material: solid beech wood
Cushioning: genuine leather or easy – care pleather material
Dimensions: (without fittings) 40 x 35 x 9 cm (W/D/H) 9 x 12 5/8 x 5 7/8 inches (W/D/H)
The headrest is adjustable in position from hanging to upright support. For easier storage, the headrest can be removed effortlessly.
Small Diagonal Bench
Material: black genuine leather or easy – care pleather material
Dimensions: 80 x 23 x 7cm
31 ½ x 9 x 2 ¾ inches
The bench is easy to move on its surface and no tools are needed to stabilize it with 2 quick release grips. Both pillows can be separated effortlessly for full access to everything. With the pillows separated this Bench is also known as the „Witches Throne“.
Pipe adapter „ Pipe+Foot Restraint“
Material: solid beech wood, black finish
Dimensions: 43 x 19 x 7cm
17 x 7 ½ x 2 ¾ inches
This pipe adapter can be mounted onto the vertical pipes. The footrest consists of 2 high grade steel pipes and is equipped with a genuine leather strap. The strap can be secured with a carbine (snap hook), which is included. Another way to secure the strap would be a padlock (not included).
This module system accessory can be mounted to the support pipes at any height. Its quick release grip makes tools unnecessary.
Pipe adapter „Pipe to chain“
Material: solid beech wood, black finish
Dimensions: 16 x 7 x 4 cm
6 3/8 x 2 ¾ x 1 ½ inches
This pipe adapter can be mounted onto the vertical pipes and is used to connect with shackles and neck restraints. The package includes a chain and carbines (snap hooks) which attach easily to the latches of the pipe adapter (shackles and neck restraints are not included in this package)
This module system accessory can be mounted to the support pipes at any height. Its quick release grip makes tools unnecessary.
Cushioned Horizontal Pipe
Material:
Pipe: stainless steel, brushed
Cover: genuine leather or easy – care pleather material
Horizontal pipe
1 piece of stainless steel pipe, brushed, 46 1/2 inches,(118cm) in length, including its padding the pipe is 3 1/8 inches (8cm), in diameter and perfect as support.
To mount onto the vertical pipes a pipe to pipe adapter is required.
Areas of use:
- bending over
- as support when upright or seated
- as a seat
Heavy Duty Pillory
Material: solid beech wood, black finish
Dimensions: all models
100 x 26 x 4 cm (L/W/H)
39 3/8 x 10 ¼ x 1 ½ inches (L/W/H)
Finally a versatile pillory for the most delicate women hands and burly ones. Our ingenious system of restraint finally makes it possible to offer the right opening for any size. The end caps are rigidly fixed onto the support pipes which can be attached in the vertical or horizontal position. Now you guide the planks of the pillory into the housing of the end cap and lock it securely with bolts. Don’t worry, for the vertical use there is pins to hold those bolts in place. Should you not use the „Pillory“, removing the bolts and pulling the boards out of its end cap housing makes it easy to disassemble.
Pillory with holes for hand and feet on its side and an extra opening in the center. What makes this pillory special is the fact that it not only offers holes for the feet on the side but also in the center for both feet together to insure a rigid position of chastity. In between these holes you also find ones for the hands to restrain both hands and feet at the same time.
1 Pillory for hands and head
The hole for the hands is oval shaped and can be increased in steps of a (5mm),1/8 of an inch from (4cm), 1 ½ - (6cm),2 3/8 inches in diameter (on the small side of the oval). The hole for the head is round and measures (14cm),5 ½ inches, expandable up to (16cm),6 3/8 inches in diameter.
1 Pillory for hands and feet
Foot hole diameter: (9,3cm),3 5/8 inches, expandable to (11,3cm),4 ½ inches (in steps of an (5mm),1/8 of an inch)
Hand hole: oval, on the small side (4cm),1 ½ inches in diameter, expandable to (6cm),2 3/8 inches (in steps of (5mm),1/8 of an inch)
Vario Board
Solid support beam with cushioned plates
Material: Black genuine leather or easy – care pleather material
Dimensions: 50 3/8 x 5 7/8 x 4 ¼ inches (L/W/H) 128 x 15 x 11 cm(L/W/H)
The Vario Board can be mounted onto 2 horizontal pipes in any position with its quick release grips. No additional tools are needed.
On the underside there are slits for strap insertion. The sides house 7 high grade steel fixed eyehooks and the end caps house 1 each.
By pulling a rope through the eyehook on one end cap you can use the module system accessory Cable Winch to easily tilt the board.
Thigh Support
Material: Genuine leather or easy – care pleather material, Genuine leather strap
The precurved Thigh Supports have soft cushioning and are equipped with a sturdy leather strap.
This package includes the necessary pipe adapters, which allows you to vary the distance to the bench and the height of the Thigh Supports.
Its angle is interchangeable in one fluid motion.
Package
1 Modul Platform Base Plate with Pads
2 Pipes High
1 Beam
1 Cable Wrench
2 Horziontal Pipes ( used as vertical pipes)
1 Cushioned Horizontal Pipe
6 Pipe Adapter "Pipe to Pipe"
2 Bridge Heads
1 Wide Diagonal Bench with Headrest
1 Small Diagonal Bench
1 Pillory for hands and head
1 Pillory for hands and feet
2 Pipe Adapter "Pipe to Foot"
2 Pipe Adapter "Pipe to Chain"
1 Varioboard
2 Thigh Supports
For easier installment of the horizontal pipes we recommend:
