Basic Floor Element Vision X
The ultimate base for your obsession
Sturdy smooth surface for secure stance or (as an option) comfortable, easily removable padded mats upholstered in genuine leather or easy – care pleather material.
Dimensions: 50 3/8 x 46 7/8 x 3 7/8 inches 128 x 119 x 10 cm
The basic floor consists of 2 plate elements and 2 connecting elements, each with 5 restraining latches made of stainless steel.
The different support pipes can be installed in 8 different center positions. The perimeter gives you the opportunity to install the support pipes for the Ceiling Beams or the Beam in combination with the Cable Winch.
These multiple possibilities make the Basic Floor Element also ideal for multiple module system accessories for multiple people.
The Basic Floor Element can be combined with all devices of the module system collection (even those parts not specifically shown under the section individual units )
The perimeter and central pipe housings have standardized spacing. In the center between the pipe holes you can install one removable eyehook each.
The padded mats are individually removable, thus allowing you to use the pipes in the center and still make use of the side mats.
Optionally you can order the padded plates with the Basic Floor Element.
Just the Basic Floor Element in itself offers a broad variety of possibilities of restraints.
To avoid sliding or repositioning on the floor the underside houses several rubber stoppers.
The 2 elements of the Basic Floor allows for easy storage.
Ceiling Beams
Dimensions: 50 3/8 x 46 7/8 x 5 7/8 inches
The Ceiling Beams consists of 3 wooden beams that are connected by 2 horizontal pipes. Each beam is equipped with 5 eyehooks for multiple restraining options.
The beams are strategically placed on the support pipes.
Support Pipes High (4 piece)
Material: stainless steel, brushed
Please make sure there is a 3 7/8 inches (10 cm) clearance to the ceiling. We suggest a total lenghth of 90 ½ inches (230cm)
Please make sure any additional hardware (ropes, chains, carbines, etc...) can withstand at least the maximum weight limit.
Maximum Capacity of the beams: 265 pounds (120Kg)
Wide Diagonal Bench
Comfortably cushioned bench
Material: Black genuine leather or easy – care pleather material
Dimensions: 31 ½ x 23 5/8 x 2 ¾ inches (80 x 60 x 7cm)
The bench is easy to move on its surface and no tools are needed to stabilize it with 2 quick release grips. On each corner a D_ ring is installed.
Head Rest
Material: solid beech wood
Cushioning: genuine leather or easy – care pleather material
Dimensions: (without fittings) 40 x 35 x 9 cm (W/D/H) 9 x 12 5/8 x 5 7/8 inches (W/D/H)
The headrest is adjustable in position from hanging to upright support. For easier storage, the headrest can be removed effortlessly.
Small Diagonal Bench
Material: black genuine leather or easy – care pleather material
Dimensions: 31 ½ x 9 x 2 ¾ inches 80 x 23 x 7cm
The bench is easy to move on its surface and no tools are needed to stabilize it with 2 quick release grips. Both pillows can be separated effortlessly for full access to everything. With the pillows separated this Bench is also known as the „Witches Throne“.
Pipe adapter „ Pipe+Foot Restraint“
Material: solid beech wood, black finish
Dimensions: 17 x 7 ½ x 2 ¾ inches 43 x 19 x 7cm
This pipe adapter can be mounted onto the vertical pipes. The footrest consists of 2 high grade steel pipes and is equipped with a genuine leather strap. The strap can be secured with a carbine (snap hook), which is included. Another way to secure the strap would be a padlock (not included).
This module system accessory can be mounted to the support pipes at any height. Its quick release grip makes tools unnecessary.
Pipe adapter „Pipe to chain“
Material: solid beech wood, black finish
Dimensions: 6 3/8 x 2 ¾ x 1 ½ inches 16 x 7 x 4 cm
This pipe adapter can be mounted onto the vertical pipes and is used to connect with shackles and neck restraints. The package includes a chain and carbines (snap hooks) which attach easily to the latches of the pipe adapter (shackles and neck restraints are not included in this package)
This module system accessory can be mounted to the support pipes at any height. Its quick release grip makes tools unnecessary.
Heavy Duty Pillory
Material: solid beech wood, black finish
Dimensions: all models
100 x 26 x 4 cm (L/W/H)
39 3/8 x 10 ¼ x 1 ½ inches (L/W/H)
Finally a versatile pillory for the most delicate women hands and burly ones. Our ingenious system of restraint finally makes it possible to offer the right opening for any size. The end caps are rigidly fixed onto the support pipes which can be attached in the vertical or horizontal position. Now you guide the planks of the pillory into the housing of the end cap and lock it securely with bolts. Don’t worry, for the vertical use there is pins to hold those bolts in place. Should you not use the „Pillory“, removing the bolts and pulling the boards out of its end cap housing makes it easy to disassemble.
Pillory with holes for hand and feet on its side and an extra opening in the center. What makes this pillory special is the fact that it not only offers holes for the feet on the side but also in the center for both feet together to insure a rigid position of chastity. In between these holes you also find ones for the hands to restrain both hands and feet at the same time.
1 Pillory for hands and head
The hole for the hands is oval shaped and can be increased in steps of a (5mm),1/8 of an inch from (4cm), 1 ½ - (6cm),2 3/8 inches in diameter (on the small side of the oval). The hole for the head is round and measures (14cm),5 ½ inches, expandable up to (16cm),6 3/8 inches in diameter.
1 Pillory for hands and feet
Foot hole diameter: (9,3cm),3 5/8 inches, expandable to (11,3cm),4 ½ inches (in steps of an (5mm),1/8 of an inch)
Hand hole: oval, on the small side (4cm),1 ½ inches in diameter, expandable to (6cm),2 3/8 inches (in steps of (5mm),1/8 of an inch)
Cushioned Horizontal Pipe
Material:
Pipe: stainless steel, brushed
Cover: genuine leather or easy – care pleather material
Horizontal pipe
1 piece of stainless steel pipe, brushed, 46 1/2 inches,(118cm) in length, including its padding the pipe is 3 1/8 inches (8cm), in diameter and perfect as support.
To mount onto the vertical pipes a pipe to pipe adapter is required.
Areas of use:
bending over
as support when upright or seated
as a seat
Vario Board
Solid support beam with cushioned plates
Material: Black genuine leather or easy – care pleather material
Dimensions: 50 3/8 x 5 7/8 x 4 ¼ inches (L/W/H) 128 x 15 x 11 cm(L/W/H)
The Vario Board can be mounted onto 2 horizontal pipes in any position with its quick release grips. No additional tools are needed.
On the underside there are slits for strap insertion. The sides house 7 high grade steel fixed eyehooks and the end caps house 1 each.
By pulling a rope through the eyehook on one end cap you can use the module system accessory Cable Winch to easily tilt the board.
Thigh Support
Material: Genuine leather or easy – care pleather material, Genuine leather strap
The precurved Thigh Supports have soft cushioning and are equipped with a sturdy leather strap.
This package includes the necessary pipe adapters, which allows you to vary the distance to the bench and the height of the Thigh Supports.
Its angle is interchangeable in one fluid motion.
Package
1 Basic Floor Element with Pads
4 Pipes High
1 Ceiling Beam
4 Horziontal Pipes (2 used as vertical pipes)
1 Cushioned Horizontal Pipe
6 Pipe Adapter "Pipe to Pipe"
2 Bridge Heads
1 Wide Diagonal Bench with Headrest
1 Small Diagonal Bench
2 Pipe Adapter "Pipe to Foot"
2 Pipe Adapter "Pipe to Chain"
1 Varioboard
2 Thigh Supports
For easier installment of the hotizontal pipes we recommend :
